• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it is relatively easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. However If windows with double panes are secured by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this situation, you will need to locate some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the window repair panes, so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled under.

After the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the property until a professional is able to come out and repair the window. It also acts as a barrier, deterring any intruders to gain access into your home. If the distance between the door and the window is significant, you may prefer a security screen that also includes an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sliding. A window that is sagging can cause problems with light, draughts, and even security. It's important to take action immediately if you realize that your upvc window repair windows are sliding.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to unblock the windows so you can access the frame. With the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've repositioned your hinges. If you are happy with the fit of the window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles can also loosen up. The majority of the time it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to close the window and perform an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

It is important to take action if get up each morning to find mouldy walls and wet floors. Water leaks from windows not only lead to the destruction of your home's structure but also hinder your efforts to control the temperature within your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the issue is, old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double glazed window repairs-glazed glass it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens with the breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they will wear out over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier if you have someone to help you hold the frame up.

Make sure that the uPVC hinges are open and closed in the right direction. This can be done by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be pleased to offer you advice.

It is also essential to grease the hinges regularly. Applying a light engineering lubricant on the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again due to wear and tear may become displaced, which causes a gap to form where the sash joins the frame. If they are beyond repair, it may be required to realign them. The interlock may be disaligned. This happens on the hinge's side, and may need to be cleaned. In some cases it might be necessary to replace them.

The next common cause of draughts is the window seals. These can become worn down or damaged over time and will allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it may be more cost-effective to replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as possible.