• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. They don't get rotten or rusty like timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. If windows with double glazed windows repairs panes are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any fragments of repairing glass fall on the fabric instead of landing on the floor where they can be trampled on and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap between the window and the door is large, you might need to consider security screens that has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a variety of issues that include sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. It's important to take action as soon as you discover that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows to reach the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, tighten the screws until they remain in position.

If you cannot reposition the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Most often this is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need close the window and perform an experiment to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it's important to take action. The leaks of water from windows do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer is applied. It is essential to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris inside them and that the sill pan is angled correctly to drain away from the window. In more severe instances, you may need to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to remember that if the leakage originates from the glass of your double glazing window repair-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze, it may be the hinges that are at fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is very easy to replace a hinge on a window however it is easier if someone helps hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain way or by improper installation in the factory. Sending us photos via our website will often solve the issue. We are always happy to provide assistance.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It also decreases the possibility of a window sticking and help prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges can also become misaligned due to wear, creating a gap between the frame and sash. These can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it might be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge side of the window, can also become misaligned, again it may be feasible to give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

The next common reason for draughts are the window seals. These can become worn down or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the upvc window repair near with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce draughts.

One of the most effective ways to reduce drafts is to use a draught excluder, these are typically fabric tubes filled with some type of filler. They can be placed on the top of your windowsill. These will help to block out cold air and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it may be more cost-effective to simply replace them instead of fixing them. So, if you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as you can.