• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC replacement double glazing handles Door Handles

Over time, the handles on your doors will wear out and will require replacement. When doing this it is crucial that the new handles conform to the dimensions of the old handle.

The top screw's position, the lever and the keyhole size are the three measurements that you need to check. Refer to the size guide for assistance in this.

Inline Lever/Lever

A lever/lever door handle is a contemporary handle that can be used on doors that are new or replacement. This style of handle is available in a variety of styles and finishes. This handle is offered by a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles of uPVC/Composite are constructed from robust materials, and are perfect for doors with multiple points that need a heavy-duty design. The handles are inline, and use the same spindle and screws to secure them. They can be easily mounted on new or existing uPVC/Composite doors.

The sprung lever design allows the handle to be positioned and angled for comfortable operation and is suitable for all users. The handle has been tested to 200,000 cycles. This helps to ensure the quality of the finish and the performance of the handle over time. The sprung lever can be cut to fit a wider range of locks. This is particularly beneficial for narrower door frames where the cylinder is further back. A shorter lever is a good choice for doors where the latch can be operated by a thumb turn on the inside.

Lever Pad

A Lever Pad upvc door handle operates differently from lever-type handles on doors. These handle types are either operated by a single spindle or by two spindles, either inline or offset. They are generally used on UPVC double glazed handles glazed doors and come in a variety of styles and finishes.

The handles are available in various finishes, including White chrome and Gold. The finish is BS EN 1670 Grade 5 and is resistant to rust. This gives the handle a high performance and durability for its intended use.

All UPVC levers for handles come with a spindle, screws, and can be fitted on the uPVC door. The 211mm backplate fixation centres allow for a bigger handle, which is typically beneficial when replacing a damaged or old Upvc door handles multi-point door lock mechanism. These handle levers are also spring-loaded, which solves the issue of door handles sagging out of their horizontal position when not in use.

When choosing a replacement UPVC handle and spindle, it is important to match the dimensions of the PZ on both the multipoint lock and the uPVC door. This measurement is also called 'brompton carry handle centres or cylinder centre'. It is important to match the correct handles.

After you have determined the proper PZ size, you will need to make sure that the lever and push pads are designed to match the American with Disabilities Act compliant handles that you need for your door. These are usually round or square, with an internal lever, and an external push pad.

The majority of UPVC Lever Pads we sell are sprung. This means that they return to a horizontal position when they are not in use instead of hanging and possibly sticking in the frame. This stops draughts from entering the property. The majority of UPVC lever pad handles come in both left and right handed models that allow them to be placed on either side of doors.

Euro Cylinder

Cylinder locks are usually used on uPVC doors, but can also be found on other types of doors. They work by using a key to unlock a cylinder case which is then revealed with pins that can be aligned to those in the lock body and allowing them to turn the cam, thereby opening the door. Euro cylinders can be fitted with up to six pins, with external and internal doors generally needing different levels of security.

The choice of cylinder is vital. It's dependent on the amount of use your doors and handles will receive. For instance, doors that are external should be fitted with a more secure cylinder while doors inside can be secured using an ordinary cylinder. In addition, some cylinders have extra features that increase security, for instance anti-drill or anti-bump properties.

To ensure that the euro cylinder is of the right size for your door, it must be measured correctly. The cylinder needs to be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn if there is one. If you are unable to measure using the lock in a fixed position, you can take it out of it. It is essential to avoid having a extension of the cylinder beyond the handle or escutcheon. This can make it vulnerable to lock snapping attacks.

Most newer cylinders have been constructed with bump and anti-drill features included in their design. They are designed to decrease the chances of an attack by causing the cylinder to rotate in a different direction. This can help stop the attack and ensure your doors are secure.

There are cylinders that are designed to withstand snapping. This is a common occurrence on cylinders. A specially designed tool is used to break the break line of the lock, and then the front of cylinder is snapped off. This is a quicker and easier way to gain access than using a multipoint locking system. It also leaves less evidence of the break-in which could hinder insurance claims.

Spring Cassette

The spring cassette is located inside the base of your door handle's backplate, providing a spring solution that returns the multipoint lock handles back to their original position after using. In the past, a lot of handles of this kind didn't have a spring built into them and without this they tend to droop or drop when the locking mechanism is removed. This simple feature is among the best ways to correct this and it is also an excellent way to stop your doors made of upvc from getting stuck in an open or closed position, as they aren't always simple to close manually.

These spring cassettes are specially designed to be used with multipoint locks sprung They will not work with multipoint handles that are not sprung and you will need to have a custom hole cut into your backplate to allow these to fit (please look at the image for a technical diagram). They are a replacement for existing broken or missing cassettes in the backplate of the door handle for numerous brands of uPVC doors. They are sold as one unit. They come with a square cut out that accommodates an 8mm shaft.

These spring cassettes offer an excellent value solution for the problem of sagging door handles. They are easy to fit and will extend the life span of your uPVC doors. Contact us for more information about our range of uPVC accessories and spares. We are always available to provide expert advice and to assist you.