• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Getting a cat flap fitted in to your home can be a huge step for any pet owner. There are numerous options for you, no matter if your cat is getting older and needs extra security or you have kittens who need to be checked.

It can be a bit daunting for people who aren't experts in installing an animal flap, but with proper instructions, it's simple. The key is preparation, planning and accuracy.

Choose the Right Door or Window

There are a variety of cat flaps, some of which have locks that can be used to prevent your pet from getting out or in and others with high tech features like microchip door entry system. But, it's important to consider the ease of your cat to train to use the flap before you purchase and install one.

It is best to place the cat flap, based on the design of your home, inside a window that opens into an area of the garden that is protected. This will help your cat feel secure when entering and leaving your home. If possible it will also provide them a route back in case they are pursued by a different cat or by humans who are intent to harm them.

It's possible to install the cat-flap on a uPVC or composite door, but it's not the same as fitting one into a wood door. This is because replacement upvc door panels with cat flap and composite doors are available in different thicknesses, which can affect the way holes are cut and the material you're fixing it to.

To avoid costly mistakes, it is recommended to consult an expert glazier before installing the flap on a glass-fronted door. If you're fitting the flap on an old wooden door, begin by introduction of your cat flap fitting near me to it prior to fitting it to allow them to get used to its shape and size, and explore it from all angles.

Find out the size of your cat's belly

To install the right cat flap that's the right size for your cat, you'll need to measure your cat's height. This will allow you to make sure that the flap is at the correct height on the door or window and also that it's large enough for him to get in and exit easily.

Place your pet on its back and gently run your fingers across their belly. Feel for any fat pads that are squishy that could be visible on their lower back, face and legs. The padding provides your pet safety and allows them to move more easily, especially when performing the many acrobatics that felines are known for.

Alternatively, you can also consider your pet's weight as a way to determine the size of an opening you'll need. If your cat weighs 5kg, for instance the suggested flap size is 14 x 12cm.

Make sure you measure your door or window

This type of cat flap, as its name suggests, is made to be fitted into a door. It allows your pet to enter and exit at its convenience. The flaps are made of plastic or aluminum and are placed in the middle of the door. They have a two-way swinging opening that can be opened by lightly pushing on either side. They are available in locking versions that offer added security, which means that your cat can't enter the door from outside.

Cat flaps are also often used on windows. They are able to be easily installed, but they have to be placed at a height where cats and dogs have a difficult time to access them. If the window is too high to use a cat flap, then ramps, steps, or specially built stairs can be utilized to help the animal access it.

A cat flap can also be fitted into a brick wall but this is not recommended unless you are skilled in masonry work as it could weaken the wall's structure. It is important to make sure there are no cables and pipes in the wall prior to you begin. Always consult a professional if you need to create a hole for pipes or cables. Wearing protective goggles or a dust mask will ensure that you don't breathe in the dust that is generated when cutting through your walls.

Select the Right Cat Flap

There are numerous cat flaps available on the market, and all offer various features. Certain cat flaps come with security features, such as magnetic locks or microchips which prevent unauthorised entry. They also prevent your pet from allowing friends or another animal into the house. Certain seals are weatherproof and have insulation to keep out moisture and draughts.

There's also a range of sizes based on the size and breed of your pet. Some cat flaps come in rectangular shapes, while others are circular or square. The kind of cat flap you pick will depend on the dimensions of the opening as well as the kind of door or window you're fixing it to.

Lastly, think about the opening mechanism that your cat flap will have. A simple aluminium or plastic swing-out door is one choice and is typically the least expensive. However, it will not keep other animals or cats from entering and you may let draughts in too.

Once you have selected the right cat flap and measured the window or door and window, it's now time to put it in place it. Start by marking the height of the belly on the door using your ruler. Use a spirit level to make sure that the line is straight against the door and not too low. Create a template for the shape of the cat flap using your spirit level as a reference. Then, you can use your Jigsaw to cut the outline of the door. Once you're happy with the results sand down the edges and then drill through the pencil lines to make holes for screws.

Prepare the Tools

It's important to have the right tools when doing any DIY project. You'll require the cat flap along with a pencil and tape measure, a spirit-level, a drill and a jigsaw depending on the kind of door or window with cat flap.

If you're installing a composite door, check with the manufacturer prior to making any alterations as this may affect the warranty or damage the weathertight seal. In this scenario it's likely you'll need to replace the glass with a brand new piece of toughened glass cat flap installation near me.

You'll require a jigsaw to cut out your cat flap from a wooden or uPVC door. Follow the directions given by the manufacturer. Make use of a template to determine the size of hole you'll require.

After you've cut the required hole, you must sand down the edges of the opening to smooth them. This will prevent any rust or water damage from occurring in the future. It is also recommended to cover the holes in your door or window and the back of the flap to prevent wind and rain. Once the sealant is dry then you're now ready to put in your new cat flap!

Install the Flap

If you want your cat to move around as it pleases, fitting a flap can help. This is a simple process that most people can complete themselves, although you will likely require the assistance of a professional if you are installing the flap in an unglazed door or any other kind of uPVC door.

Look at the instructions that came with your cat flap. There is an illustration of the template. This will give an idea of the location where the holes are to be drilled for the flap on the door. Mark the areas you'll need to drill in using the pencil.

After you've marked the door's area, use a jigsaw to cut out the shape of the cat flap. This is a fairly simple job, but you'll need to be comfortable with the saw. Many companies will complete this task for you for a reasonable price If you're not sure how to do it yourself.

The next step is to attach the interior part of the cat flap to the hole in your door. It is possible to seal it prior to doing this to ensure that it is weather and water resistant. Then, you can put the outer part of the flap on the top of the fixing bolts and tighten them all together. It is recommended that you test the flap with your cat to ensure that it functions properly and that they can move easily through it.